Skimmer AKULA UKS-180

The Ultra Reef AKULA UKS  range of protein skimmers is a method of filtrationthat allows the removal of  the surfactants from seawater. It pumps a mixture of aquarium water and air bubbles into a mixing chamber. By exploiting the properties of the film surface tension between air and water, it generates a foam overflowing from the main chamber, and then into a collection cup which allows for easy removal PERFORMANCE Tank size For aquariums from 300 to 700 lit Skimming pump ULTRE REEF PSK+ 1000 by SICCE Air intake ~ 700-800 lit/h Water intake ~ 1400 lit/h Power consumption ~ 25 W DIMENSION Base plate 19x25 cm (7.5x9.8”) Height 56 cm (22”) Water level 18-22 mm (7-8.6“) To be installed in sump POWER Standard 230-240V 50Hz On request 110-120V 60Hz
PRODUCT FEATURES Thanks to the experience gained in more than half a century in the fluid dynamics, in our product we propose the following solutions: Modern design and low power consumption The internal pump design is the most compact solution you could have for your aquarium. The pump is housed directly inside the main chamber to reduce the lateral ingots. To access the pump just remove the locking screws and lift off the conical chamber. Skimmers water intake is direct, so it is not necessary to use a feed pump. This solution significantly reduces power consumption and maintenance time. Particular attention to silence The rubber feet absorb all annoying vibrations. To silence the suction of the air, the skimmer is complete of a built-in silenced muffler to absorb the noise produced by the venturi. The exhaust system is housed on the base and submerged to avoid any noise from the water returning to the system. Performance and reliability with Ultra Reef PSK+ Plus skimming pumps The new Ultra Reef PSK+ Plus needle wheel pump is exclusive to Ultra Reef. This is a dedicated model of the famous PSK pump and is produced for Ultra Reef by Sicce. It is designed to produce the best air and water emulsion through a needle wheel impellor. The transparent body allows pump inspection even during operation, while reinforced impellers allow superior performance and strength. Easy adjustment, stable and accurate regulation The conical body is made from cast acrylic designed to improve internal flow and create homogenous thrust throughout the entire body, the shaped diffusion cup improves the separation of air and water, ensuring excellent stability even from the first start. Internal level adjustment is carried out through a screw valve and the silencer has the added flexibility of an adjustment screw to set the maximum amount of air intake. Innovative Easy-Flip gasket system Collection cup and internal neck feature an "Easy Flip" seals for a firm grip and easy removal during maintenance. For ease of maintenance the neck of the cup can also be removed for easy cleaning. Easy and thorough maintenance Our product can be disassembled virtually in every single component. The generous thicknesses of the materials used ensure excellent resistance during all maintenance, while small component reduction facilitates cleaning and replacement of individual worn components.

DESIGN, QUALITY AND PERFORMANCE

During product development, we start from what the aquarist needs. The construction choices we use always have a practical logic and often depart from a direct need, which could not be fully satisfied by products currently available on the market. Made in Italy product Our company was founded in 1957 and since then has produced hydraulic equipment and flow devices of the highest quality without compromise. In our factory, we work with care and passion that has always characterized Italians companies. Our success is based on customer satisfaction through efficient processing and delivery of high quality products at competitive price. CNC machining of full blocks of PVC We perform all of the internal development of our products in house, from design to production. Our brand guarantees a deep and careful evaluation of the operation, both technically and aesthetically, thanks to the CNC machining of full blocks of PVC Research and development without reliance Thanks to continuous research for innovations and new technologies to be used in manufacturing process we are always at the forefront in development of our products. Flexibility and speed of response to recent searches in the sector guarantee our products excellent performance. Anticorrosion Titanium screws Screws DIN7985 are made in Titanium G2, resistant to corrosion caused by seawater.To give the best even in smaller components. ISO 9001 Quality certification The goal of business excellence can be achieved only if management and employees assume joint responsibility for quality, standardized methods and instruments and processes are continuously improved. Our company is certified and complies with the ISO 9001, the most commonly used international standard that provides a framework for Quality Management Systems.
ULTRA REEF Italian technology since 1957 "ULTRA REEF" by Ultra Pompe S.r.l. - Via Goldoni 37, Trezzano sul Naviglio, 20090 (Milano - Italia) Partita IVA 00210510152 All information contained on this site are not binding and are subject to change without notice.