Charge and drain systems U-40

The Ultra Reef U-40 range of charge and drain system allows the management of the interchange between an aquarium and the relative sump tank DRAIN U-40/S Hole on glass 43 mm Glass thickness 0-24 mm External dimensions 7 cm External diameter 8 cm Estimated flow 700-1200 l/h Hose connection Øe 40 mm CHARGE U-40/C Hole on glass 43 mm Glass thickness 0-24 mm External dimensions 7 cm External diameter 8 cm Load pump up to 4500 l/h Hose connection Øe 20 mm ADVISED SET UP Aquarium up to 300 lit - 1x Drain U40/S, 1x Charge U40/C Aquarium up to 500 lit - 2x Drain U40/S, 1x Charge U40/C
PRODUCT FEATURES Thanks to the experience gained in more than half a century in the fluid dynamics, in our product we propose the following solutions: Modular design The modular system allows you to compose your own system using a single drilling diameter in the glass, making it possible to swap the charge and discharge at any time. In fact, our system uses the same diameter of pass-glass for both systems making it possible to subsequently add a further charge or drain without being bound by the original arrangement. Withou glue All components are assembled by means of threaded connectors and seals and can be completely disassembled to facilitate maintenance and avoid losses due to defective bonding. Moreover, having the thread made on the screwed components inside the tank, it will be possible to remove the system without having to move the aquarium if it is mounted close to a wall. Triple O-ring sealing Our system uses a sealing system made with 3 silicone O-ring gaskets. This solution allows waterproof sealing without the need to tighten the components, avoiding dangerous forces on the glass plate. Disassembly can be done by hand at any time and you will not have to use teflon tape or silicone paste to reassemble the system. Charge technology The charge system is equipped with nozzle on spherical support with adjustable attack which can be rotated and bent at will. The threaded connection is compatible with commercial nozzles and can be replaced with any fitting with thread 1/2" or 3/4” (according to size). Drain technology The drain system is equipped with removable grid to facilitate cleaning operations. The increased size of the grid help the flow of water ensuring flow rate and silent running. The grille is machined with side openings to prevent it from being completely occluded from flat objects. Easy and thorough maintenance Our product can be disassembled virtually in every single component. The generous thicknesses of the materials used ensure excellent resistance during all maintenance, while small component reduction facilitates cleaning and replacement of individual worn components.

DESIGN, QUALITY AND PERFORMANCE

During product development, we start from what the aquarist needs. The construction choices we use always have a practical logic and often depart from a direct need, which could not be fully satisfied by products currently available on the market. Made in Italy product Our company was founded in 1957 and since then has produced hydraulic equipment and flow devices of the highest quality without compromise. In our factory, we work with care and passion that has always characterized Italians companies. Our success is based on customer satisfaction through efficient processing and delivery of high quality products at competitive price. CNC machining of full blocks of PVC We perform all of the internal development of our products in house, from design to production. Our brand guarantees a deep and careful evaluation of the operation, both technically and aesthetically, thanks to the CNC machining of full blocks of PVC Research and development without reliance Thanks to continuous research for innovations and new technologies to be used in manufacturing process we are always at the forefront in development of our products. Flexibility and speed of response to recent searches in the sector guarantee our products excellent performance. Anticorrosion Titanium screws Screws DIN7985 are made in Titanium G2, resistant to corrosion caused by seawater.To give the best even in smaller components. ISO 9001 Quality certification The goal of business excellence can be achieved only if management and employees assume joint responsibility for quality, standardized methods and instruments and processes are continuously improved. Our company is certified and complies with the ISO 9001, the most commonly used international standard that provides a framework for Quality Management Systems.
ULTRA REEF Italian technology since 1957 "ULTRA REEF" by Ultra Pompe S.r.l. - Via Goldoni 37, Trezzano sul Naviglio, 20090 (Milano - Italia) Partita IVA 00210510152 All information contained on this site are not binding and are subject to change without notice.

Accessories T-40

You can also purchase some accessories to facilitate the use and installation of the product.

HOSE FOR DRAIN

This flexible hose is our proposal to make a drain system as silent as possible. The soft material

with which it is made reduces noise and vibrations while the hard plastic spiral allows reallocation of

sweet curves without the hose becoming shrinking.

FEATURES Compatible with Drain system U40/S Internal diameter 40 +0/-1 mm External diameter 48 +1/-1 mm Lenght 2 mt Colour Black